Kickstand for E-bike KSA40 ENGWE Engine Pro 2.0

The KSA40 ENGWE Engine Pro 2.0 E-bike Kickstand is an adjustable side kickstand for 20- to 22-inch electric bicycles with a KSA40 direct rear mount. The product is a ULIP replacement part and is not an original part from the bicycle manufacturer.

The ENGWE Engine Pro 2.0 model is listed on the direct compatibility list for the same version of the adjustable two-bolt kickstand.

Compatibility and Pre-Purchase Verification

The product is intended for the ENGWE Engine Pro 2.0 model when the specific bicycle has two M6 threaded holes with a 40 mm center-to-center spacing on the left rear part of the frame. Since the manufacturer may change the frame or bolts between model years, measure the spacing before ordering and check for free clearance with the brake, tire, chain, and folded kickstand.

Features

• Two-bolt KSA40 direct mount, 40 mm spacing;
• Adjustable length 308–367 mm for correct bicycle tilt;
• 60 mm wide upper mounting plate;
• Profiled support leg and included hex wrenches;
• Black finish, weight approximately 347 g.

Installation

1. Compare the kickstand bracket with the holes on the frame and manually start both bolts without force.
2. Tighten the bolts evenly according to the bicycle manufacturer's instructions.
3. Adjust the length so that the bicycle stands stably and is not too upright.
4. Before riding, ensure that the folded kickstand does not hit the tire, brake, chain, or crankset.

Technical Specifications