• ULIP 20×4.0 / 3.50-16 Inner Tube for Fat E-Bike – 1/6
  • ULIP 20×4.0 / 3.50-16 Inner Tube for Fat E-Bike – 2/6
  • ULIP 20×4.0 / 3.50-16 Inner Tube for Fat E-Bike – 3/6
  • ULIP 20×4.0 / 3.50-16 Inner Tube for Fat E-Bike – 4/6
  • ULIP 20×4.0 / 3.50-16 Inner Tube for Fat E-Bike – 5/6
  • ULIP 20×4.0 / 3.50-16 Inner Tube for Fat E-Bike – 6/6

Duše ULIP 20 × 4,0 pro ENGWE Engine Pro

Informace o prodejně
Prohlídka / osobní odběr je možný od pondělí do soboty.
Otevírací doba: Po–Pá: 9:00–19:00
So: 10:00–16:00
Neděle a státní svátky: Zavřeno
Adresa: Tržaška cesta 222, 1000 Ljubljana
Telefon: +386 30 771 787
E-mail: [email protected]
19,90 EUR
19,90 EUR

Doba dodání v rámci EU

  • American Express
  • Apple Pay
  • Bancontact
  • Google Pay
  • iDEAL Wero
  • Klarna
  • Maestro
  • Mastercard
  • MobilePay
  • PayPal
  • Shop Pay
  • Union Pay
  • USDC
  • Visa

ULIP Inner Tube 20×4.0 for ENGWE Engine Pro

Model-specific offer for ENGWE Engine Pro, a foldable full-suspension fat e-bike. ENGWE specifies 20 × 4.0 tires. The ULIP inner tube is therefore intended for replacement on a bicycle that still uses the original or equivalent 20×4.0 tire with an inner tube.

Why it's suitable

  • Size: 20×4.0; the manufacturer's additional designation for the inner tube is 3.50-16.
  • Use: wide fat-bike tires for asphalt, gravel, sand, and other mixed surfaces.
  • Material: flexible butyl rubber for good air retention and damping.
  • Model: prepared as a precisely tailored offer for the ENGWE Engine Pro.

Check before ordering

Check the 20×4.0 marking and the valve/rim type on the sidewall of your existing tire. Models may vary by year or market. The inner tube is not intended for sizes 20×3.0, 20×2.125, 24×4.0, or 26×4.0 and is not a substitute for a dedicated tubeless setup. The package contains one inner tube.

Náhradní díly podle značky

Příspěvky na blogu

Zůstaňte v obraze s novinkami ze světa elektrické mikromobility.

Další otázky ohledně produktu Duše ULIP 20 × 4,0 pro ENGWE Engine Pro?

Kontaktujte nás