Hybrid tubeless tire 10x2.75-6.5 for Speedway 4

Hybrid tubeless tire 10x2.75-6.5 for Speedway 4

Hybrid tread: Closely spaced low tread blocks with channels between them.

This black 10 × 2.75-6.5 tire for Speedway 4 has low tread blocks and transverse channels. The TUBELESS marking on the sidewall confirms tubeless construction, which requires a suitable tubeless rim and valve for proper sealing. The tire replaces a worn or damaged tire; the rim is not included.

Features and dimensions

• Size marking: 10 × 2.75-6.5.
• Vehicle model: Speedway 4; compare the complete tire size and rim construction.
• Construction: tubeless black tire with a low block tread.
• Approximate outer diameter: 240 mm.
• Approximate inner diameter: 161 mm.
• Approximate width: 83 mm.
• Weight: approximately 726.6 g.
• Carcass marking: NYLON.
• An arrow on the sidewall indicates the direction of rotation.
• Marked maximum tire load: 85 kg (187 lb) at 45 PSI (300 kPa). This does not define the load capacity of the entire scooter or its recommended tire pressure.

When to replace it and how to install it

• Replace the tire if the tread is severely worn or there are cracks, bulges or bead damage. Also check clearance around the mudguard and brake.
• Release all air before removal. Clean the rim edge, inspect the valve and fit the new tire in the marked direction of rotation without damaging the sealing bead.
• Check that the tire is evenly seated and sealed around the entire rim. Set the pressure according to the vehicle instructions and the tire and rim limits; check it again before the next ride.