180 mm Brake Disc with 6 Holes for Engwe L20 3.0 Pro Electric Bicycle

180 mm Brake Disc with 6 Holes for Engwe L20 3.0 Pro Electric Bicycle

The L20 3.0 Pro is a compact bike with a low step-through, wide tires, mid-drive motor, suspension fork, and rear rack. The mid-drive motor and practical payload capacity require well-modulated braking power for starts, stops, and urban descents.

Why a 180mm disc for the ENGWE L20 3.0 Pro?

• Confirmed Diameter: The ENGWE L20 3.0 Pro model uses hydraulic dual-piston disc brakes with 180mm rotors front and rear.
• Rotor Role: The 180mm disc is suitable for the increased braking reserve needed for a practical mid-drive setup.
• Attachment: The disc has a standard six-hole mounting design and is intended for either the front or rear brake.
• Essential Replacement Part: ULIP SKU ULP4268.00.

When to replace the rotor?

Replacement is advisable for deep grooves, noticeable warping, pulsation at the lever, or when the disc is worn below the permissible thickness. When installing a new rotor, also check the brake pads and proper caliper centering.

Mandatory check before ordering

The same diameter does not guarantee complete compatibility. Compare the number and arrangement of holes, the bolt circle diameter, the center bore, and the thickness with your original disc. The package contains one brake disc.