This replacement assembly for the KuKirin M4 Max combines a round display, finger throttle, S/M buttons and an ignition key switch. The black housing clamps to the handlebar. Its short lead ends in a round female connector with a green insert and five contact sockets.
Compatibility
For the KuKirin M4 Max with the matching display and throttle assembly. Compare the connector, five-contact arrangement, clamp and existing electronics before ordering. Matching appearance or handlebar diameter alone does not establish electrical compatibility. Fitment for the M4, M4 Pro or other models is unconfirmed.
Technical specifications
| Model | KuKirin M4 Max |
|---|---|
| Assembly | Round display, finger throttle, S/M buttons and key switch |
| Connector | 1 round female connector; green insert, 5 contact sockets |
| Approximate assembly dimensions | 126.5 × 118.3 × 53.4 mm |
| Clamp internal diameter | approximately 22.3 mm |
| Cable length | approximately 8.9 cm |
| Connector width shown | approximately 9.1 mm |
| Net weight shown in supplier photo | approximately 149.4 g |
Package contents
1 display assembly with throttle, key switch, clamp and connector lead, plus 2 keys. The controller and main wiring harness are not included.
Installation and checks
- Switch off the scooter and disconnect the battery as instructed by the manufacturer. Photograph the connector and position of the original assembly.
- Position the clamp so the throttle returns freely to its resting position. Align the connector keyway, avoid forcing contacts and keep the cable free of pinching.
- Check the display, key-operated power, throttle response and motor cut-off when braking before riding. Have a technician inspect mismatched connectors or communication faults.
Części zamienne do KuKirin
-
Tarcza hamulcowa 160 mm z 6 otworami do hulajnogi elektrycznej KuKirin G2
Cena regularna 14,90 EURCena promocyjna 14,90 EUR Cena regularnaCena jednostkowa na -
Oryginalna ładowarka 54,6 V 2 A do KuKirin G2
Cena regularna 49,90 EURCena promocyjna 49,90 EUR Cena regularnaCena jednostkowa na -
Oryginalna ładowarka 58.8 V 2 A do KuKirin G2 Master 2025
Cena regularna 59,90 EURCena promocyjna 59,90 EUR Cena regularnaCena jednostkowa na -
Port ładowania do KuKirin G2
Cena regularna 19,90 EURCena promocyjna 19,90 EUR Cena regularnaCena jednostkowa na -
Stacyjka elektryczna do hulajnogi elektrycznej KuKirin G4
Cena regularna 29,90 EURCena promocyjna 29,90 EUR Cena regularnaCena jednostkowa na -
WyprzedaneZapasowa płytka drukowana wyświetlacza do KuKirin G4
Cena regularna 39,90 EURCena promocyjna 39,90 EUR Cena regularnaCena jednostkowa na -
Wzmocniona dętka ULIP 9 x 3.0-5.5
Cena regularna 14,90 EURCena promocyjna 14,90 EUR Cena regularnaCena jednostkowa na -
Śruba z nakrętką 14 mm do silnika KuKirin G2
Tylko 4 sztuk pozostałoCena regularna 9,90 EURCena promocyjna 9,90 EUR Cena regularnaCena jednostkowa na -
Manetka przyspieszenia z zamkiem na klucz i dwoma przyciskami do hulajnogi elektrycznej KuKirin G2 Master
Cena regularna 29,90 EURCena promocyjna 29,90 EUR Cena regularnaCena jednostkowa na -
W pełni metalowe klocki hamulcowe Tongli do hulajnogi elektrycznej KuKirin G4
Cena regularna 12,90 EURCena promocyjna 12,90 EUR Cena regularnaCena jednostkowa na
Dlaczego warto wybrać EVOLT?
Tržaška cesta 222, 1000 Ljubljana, Słowenia
Odwiedź nasz salon o powierzchni 200 m² w Vič, Lublana, gdzie sprzedaż, serwis i części zamienne są dostępne w jednym miejscu.
Obejrzyj i wypróbuj produkty osobiście, korzystając z fachowego doradztwa, serwisu w Słowenii oraz wsparcia w zakresie części zamiennych po zakupie.
PON–PT: 9:00–19:00
SOB: 10:00–16:00
Części zamienne i akcesoria
W magazynie w Lublanie
EVOLT dostarcza części zamienne do hulajnóg elektrycznych, rowerów elektrycznych i innych pojazdów elektrycznych.
Odkryj komponenty magazynowane w Słowenii, z szacunkami dostawy opartymi na produkcie i miejscu docelowym.
Wspieramy użytkowników, serwisy naprawcze, sprzedawców detalicznych i partnerów biznesowych poprzez zaopatrzenie detaliczne i hurtowe.
