Reinforced Inner Tube 10 x 2.5 with 90° Valve for Kaabo Mantis Pro Electric Scooter

Reinforced Inner Tube 10 x 2.5 with 90° Valve for Kaabo Mantis Pro Electric Scooter

This reinforced inner tube, sized 10 x 2.5, is designed for the Kaabo Mantis Pro electric scooter. It features a 90-degree angled valve, which can facilitate easier inflation depending on your wheel design. The reinforced construction aims to provide a longer lifespan compared to standard inner tubes.

Product Overview and Compatibility

This inner tube is a suitable replacement component for the Kaabo Mantis Pro electric scooter. The 10 x 2.5 sizing refers to the nominal outer diameter and width of the tyre it is designed to fit. The 90-degree valve is a key feature for compatibility with specific rim and wheel hub designs, ensuring proper access for inflation.

To ensure correct fitment, always verify the size marked on your existing tyre's sidewall (e.g., "10x2.5") and confirm that a 90-degree valve stem is appropriate for your scooter's wheel rim and valve hole arrangement.

Key Characteristics

• Size: 10 x 2.5
• Valve Type: 90-degree angled valve
• Construction: Reinforced for enhanced durability
• Intended Use: Replacement inner tube for Kaabo Mantis Pro electric scooters
• Dimensions:
  • Outer Diameter (uninflated): Approximately 235 mm
  • Inner Diameter (uninflated): Approximately 148 mm
  • Width (uninflated): Approximately 43 mm
  • Valve Stem Length: Approximately 35 mm
• Net Weight: Approximately 136 g

Installation and Safety Guidance

When installing a new inner tube, it is important to follow proper procedures to avoid damage and ensure safe operation:

• Check Tyre and Rim: Before installation, inspect the inside of the tyre for any sharp objects, debris, or damage. Also, check the rim for any burrs or sharp edges that could puncture the new tube.
• Valve Alignment: Carefully insert the valve stem through the valve hole in the rim, ensuring it is straight and not pinched.
• Seating the Tube: Partially inflate the inner tube just enough to give it shape before placing it inside the tyre. This helps prevent pinching the tube between the tyre bead and the rim during installation.
• Tyre Bead Seating: Ensure both tyre beads are fully and evenly seated on the rim before full inflation.
• Inflation: Inflate the tyre gradually, checking frequently for proper seating of the tyre beads. Do not exceed the maximum pressure recommended on your tyre's sidewall.
• Post-Installation Check: After inflation, visually inspect the tyre and rim for any bulges or uneven seating. Ride cautiously for the first few minutes to confirm stability.