Reinforced Inner Tube 10 x 2.5 with 90° Valve for Dualtron Forever

Reinforced Inner Tube 10 x 2.5 with 90° Valve for Dualtron Forever

This is a reinforced inner tube, specifically designed for the Dualtron Forever electric scooter. It features a dimension of 10 x 2.5 and is equipped with a 90° angled valve, which can facilitate easier inflation on rims where valve access might be restricted.

The reinforced construction is intended to provide reliable air retention and durability for daily use. This inner tube serves as a direct replacement for a worn or punctured original inner tube on the specified Dualtron Forever model.

Key Features and Advantages

• Reinforced Construction: Designed for increased resistance to common issues like chafing and pinching when maintained at the correct pressure.
• 90° Angled Valve: The valve's angle is engineered for more convenient access during inflation, particularly on scooter rims that may have limited space around the valve stem. The valve stem length is approximately 35mm.
• Model-Specific Fit: Tailored for the Dualtron Forever electric scooter, ensuring compatibility with its wheel and tire setup.

Technical Specifications

• Compatible Scooter Model: Dualtron Forever
• Inner Tube Dimension: 10 x 2.5
• Valve Type: 90° Angled Valve
• Valve Stem Length: Approximately 35mm
• Version: Reinforced
• Net Weight: 136g
• Outer Diameter (Inflated): Approximately 235mm
• Inner Diameter (Inflated): Approximately 148mm
• Width (Inflated): Approximately 43mm
• SKU: ULP240.23

Before Ordering: Compatibility and Selection

To ensure you select the correct inner tube, it is crucial to verify several details beyond just the nominal wheel size:

• Tire Sidewall Marking: Always check the full dimension marking on your existing outer tire's sidewall (e.g., "10 x 2.5").
• Valve Type and Angle: Confirm that your rim requires a 90° angled valve and that its orientation is suitable for your wheel's design. The valve hole on your rim must align with the angle of this valve.
• Inner Tube Width: While this tube is 10 x 2.5, ensure it matches the width range specified for your outer tire.

The correct dimension alone is not sufficient if the valve type or angle does not match your rim's configuration.

Installation and Maintenance Guidance

Proper installation and maintenance are essential for the longevity and safety of your inner tube:

• Pre-Installation Check: Before installing, thoroughly inspect the inside of the outer tire for any sharp objects, debris, or damage that could puncture the new inner tube. Also, check the rim for any burrs or sharp edges.
• Slight Inflation: Inflate the new inner tube slightly before inserting it into the tire. This helps it hold its shape, preventing it from folding or pinching between the tire bead and the rim during installation.
• Seating the Tire: Ensure the tire beads are evenly seated on the rim.
• Inflation Pressure: Inflate the inner tube to the pressure recommended by the scooter manufacturer. Refer to your Dualtron Forever user manual or the pressure markings on your outer tire. Running with insufficient pressure is a common cause of pinch flats and tire damage.
• Post-Installation Check: After inflation, visually inspect the tire and rim to ensure everything is correctly seated and there are no bulges or uneven areas.

This product includes one inner tube per package.