Reinforced Inner Tube 10 x 2.5 with 90° Valve for VSETT 9+ Electric Scooter

Reinforced Inner Tube 10 x 2.5 with 90° Valve for VSETT 9+ Electric Scooter

This reinforced inner tube, sized 10 x 2.5, is specifically designed for the VSETT 9+ electric scooter. It features a 90-degree angled valve for convenient inflation and is constructed with a reinforced wall for enhanced durability and a longer lifespan.

Product Overview and Compatibility

The inner tube is a critical component for pneumatic tyres, providing the air chamber that supports the scooter's weight and absorbs shocks. This particular inner tube is a suitable replacement part for the VSETT 9+ electric scooter, ensuring proper fit and function within its wheel assembly.

• Exact Size: 10 x 2.5
• Valve Type: 90-degree angled valve (Schrader type, with a length of 35mm from the bend to the tip)
• Compatibility: Designed for VSETT 9+ electric scooters.
• Reinforced Construction: Features a reinforced wall for improved resistance to punctures and wear, contributing to extended use.

Key Dimensions and Weight

To ensure correct fitment, please verify the following dimensions against your existing inner tube or tyre specifications:

• Outer Diameter (uninflated): Approximately 235 mm
• Inner Diameter (uninflated): Approximately 148 mm
• Width (uninflated): Approximately 43 mm
• Net Weight: 136g

Always check the sidewall marking of your tyre for the exact size (e.g., "10x2.5") to confirm compatibility before purchase. The nominal wheel size alone may not be sufficient.

Installation and Safety Guidance

Proper installation of an inner tube is essential for safety and performance. We recommend professional installation if you are unfamiliar with the process.

• Pre-Installation Check: Before installation, slightly inflate the new inner tube to check for any manufacturing defects.
• Tyre and Rim Inspection: Thoroughly inspect the inside of the tyre for any sharp objects, debris, or damage that could cause a puncture. Ensure the rim is clean and free of burrs.
• Valve Alignment: Carefully insert the valve stem through the valve hole in the rim, ensuring it is straight and not pinched. The 90-degree angle is designed to facilitate easier access for inflation.
• Pinch Prevention: When seating the tyre bead onto the rim, take care not to pinch the inner tube between the tyre bead and the rim.
• Inflation: Inflate the tyre gradually, checking that the tyre bead seats evenly on both sides of the rim. Do not exceed the maximum pressure recommended on your tyre's sidewall.
• Post-Installation: After inflation, check for any air leaks and ensure the valve cap is securely fastened.