Reinforced Inner Tube 10 x 2.5 with 90° Valve for VSETT 8 Electric Scooter

Reinforced Inner Tube 10 x 2.5 with 90° Valve for VSETT 8 Electric Scooter

This reinforced inner tube is specifically designed for the VSETT 8 electric scooter, featuring a size of 10 x 2.5 and a 90-degree angled valve. It serves as a suitable replacement for a worn or punctured inner tube, helping to restore your scooter's ride quality and performance.

Key Features and Advantages

• Reinforced Construction: Engineered with a reinforced wall, this inner tube is designed for enhanced durability and a longer lifespan compared to standard inner tubes.
• Optimal Size: The 10 x 2.5 sizing is precisely matched for the VSETT 8 electric scooter, ensuring a correct fit within compatible tyres.
• 90° Angled Valve: The 90-degree valve stem facilitates easier access for inflation, particularly in wheels with limited space around the valve opening. The valve length is approximately 35mm.
• Net Weight: The inner tube has a net weight of 136g.

Compatibility and Selection

This inner tube is intended for use with the VSETT 8 electric scooter. To ensure correct compatibility, always verify the size marking on your existing tyre sidewall. The marking should indicate "10 x 2.5" or a compatible equivalent. While the nominal wheel size is 10 inches, checking the tyre marking is crucial as different tyre widths and profiles exist.

Additionally, confirm that your wheel rim and valve hole arrangement are suitable for a 90-degree angled valve. The overall diameter of the inner tube is approximately 235mm, with an inner diameter of about 148mm and a width of 43mm when uninflated.

Installation and Safety Guidance

Proper installation is essential for the longevity and safe operation of your inner tube and tyre. We recommend professional installation if you are not experienced with tyre and inner tube replacement. When installing:

• Carefully inspect the inside of the tyre for any sharp objects or debris that could cause a new puncture.
• Ensure the inner tube is not pinched between the tyre bead and the wheel rim during installation.
• Inflate the inner tube gradually, checking that the tyre beads seat correctly on the rim.
• After installation, inflate the tyre to the pressure recommended by the scooter or tyre manufacturer. Do not overinflate.
• Regularly check tyre pressure and inspect your tyres and inner tubes for any signs of wear or damage.