{"product_id":"inner-tube-20x1-75-1-95-2-125-with-automotive-valve-for-electric-bike","title":"Inner Tube 20 x 1.75\/1.95\/2.125 with Car Valve for Electric Bicycle","description":"\u003ch2\u003eInner Tube 20 x 1.75\/1.95\/2.125 with Car Valve for Electric Bicycle\u003c\/h2\u003e\n\u003cp\u003eThis inner tube is designed for electric bicycles requiring a 20-inch wheel diameter and a tyre width ranging from 1.75 to 2.125 inches. It features a robust car valve (Schrader valve) for reliable air retention and easy inflation.\u003c\/p\u003e\n\n\u003ch3\u003eProduct Overview and Use\u003c\/h3\u003e\n\u003cp\u003eThe inner tube serves as a direct replacement for worn or damaged tubes in compatible electric bicycle tyres. It is a key component for maintaining proper tyre pressure, ensuring a smooth ride, and preventing punctures. This spare part from ULIP is suitable for general servicing and repairs.\u003c\/p\u003e\n\n\u003ch3\u003eKey Characteristics\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSize Compatibility:\u003c\/strong\u003e Fits tyres marked 20 x 1.75, 20 x 1.95, or 20 x 2.125.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eValve Type:\u003c\/strong\u003e Equipped with a car valve (Schrader valve), which is common and easily inflated with standard pumps.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eValve Length:\u003c\/strong\u003e The valve stem measures approximately 32mm, suitable for a wide range of rim depths.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e \"Black Cat Tire\" is visible on the product and packaging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility and Selection Guide\u003c\/h3\u003e\n\u003cp\u003eTo ensure correct fitment, it is crucial to verify the exact specifications of your existing tyre and rim before ordering. The nominal wheel size alone is not sufficient. Please check the following:\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTyre Sidewall Marking:\u003c\/strong\u003e Locate the size marking on your current tyre's sidewall. It should match one of the supported sizes: 20 x 1.75, 20 x 1.95, or 20 x 2.125.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eValve Type:\u003c\/strong\u003e Confirm that your rim is designed for a car valve (Schrader valve). This valve type has a wider diameter than a Presta valve.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eValve Hole Arrangement:\u003c\/strong\u003e Ensure the valve hole on your rim can accommodate a car valve and that the 32mm valve stem length is appropriate for your rim's depth.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation and Safety Guidance\u003c\/h3\u003e\n\u003cp\u003eProper installation is essential for the longevity and safety of your inner tube. We recommend the following steps:\u003c\/p\u003e\n\u003col\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInspect the Tyre:\u003c\/strong\u003e Before installing the new tube, thoroughly check the inside of the tyre for any sharp objects, debris, or damage that could cause a new puncture.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAvoid Pinch Flats:\u003c\/strong\u003e When seating the tyre bead onto the rim, ensure that the inner tube is not pinched between the tyre and the rim. Inflate the tube slightly before fully seating the tyre to help prevent this.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEven Seating:\u003c\/strong\u003e After installation, visually inspect the tyre to ensure it is evenly seated on the rim all the way around.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInflation:\u003c\/strong\u003e Inflate the tyre to the pressure recommended by your tyre manufacturer (usually marked on the tyre sidewall). Do not overinflate.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePost-Installation Check:\u003c\/strong\u003e After a short ride, recheck the tyre pressure and visually inspect for any signs of air loss or uneven seating.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eIf you are unsure about the installation process, it is advisable to seek assistance from a qualified bicycle mechanic.\u003c\/p\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":64137540436345,"sku":"ULP3101.00","price":19.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0902\/7076\/1337\/files\/inner-tube-20x1-75-1-95-2-125-with-car-valve-for-electric-bicycle-01.webp?v=1785602454","url":"https:\/\/www.evolt.eu\/cs\/products\/inner-tube-20x1-75-1-95-2-125-with-automotive-valve-for-electric-bike","provider":"eVolt.eu","version":"1.0","type":"link"}